 |
Ion
Air Gun™
Hand-held gun
is a lightweight, effective spot cleaner. |
|
EXAIR's new Ion Air Gun combines incredibly
fast decay rates with low compressed air consumption. It is
the ideal way to remove static, contaminants and dust from three
dimensional parts prior to assembly, packaging, painting or finishing.
The Ion Air Gun neutralizes static electricity and cleans at distances
up to 15 feet (4.6m). Because 80% of the delivered air is
induced, the Ion Air Gun minimizes air consumption.
The Ion Air Gun induces surrounding airflow
through the gun at a ratio of 5:1, minimizing compressed air use
and maximizing ionized airflow. The force can be adjusted
from a "blast" to a "breeze". The Ion
Air Gun is quiet, lightweight and features a hanger hook for easy
storage. The 10 foot (3m) shielded power cable is extremely
flexible, and designed for rugged industrial use. There are
no moving parts to wear out. |
 |
 |
 |
- Pre-paint
dust removal
- Clean and
neutralize 3D parts
- Optics and Lens cleaning
- Cleaning
molded parts
- Photo finishing
- Furniture
finishing
- Package
cleaning
- Container
neutralization
|
- Rugged,
lightweight, easy to use
- Rapid static
decay
- Low air
consumption
- Effective
up to 15' (4.6m)
- Shockless,
non-radioactive
- Strong blowoff
force and flow
- No moving
parts - low maintenance
- Quiet - Meets OSHA
pressure and noise level requirements
|
 |
|
 |
The Ion Air
Gun incorporates a High Velocity Air Jet and electrically energized
emitter point. A small amount of compressed air is injected into the
barrel of the gun (1) inducing a high volume flow of surrounding air
(2) to pass through it. The emitter point (shockless) at the discharge
end of the gun (3) ionizes the entire airstream. The result is a high
volume flow of ionized air (4) capable of neutralizing high static
charges in fractions of a second. An optional filter and regulator
cleans the compressed air and allows infinite adjustment of airflow
and velocity. |
|
Specifications
EXAIR Model 7901 or 7907 Power
Supply (5 kV) is required for operation.
Power supplies are equipped with a 6' (1.83m) power cord, lighted
power switch and (2) high voltage outlets.
Compressed Air: 1/4" NPT inlet provided
Electrical: For use with 5 kVrms, 5 milliamperes (max.) power supply, Model
7901 (115V) or 7907 (230V). Power Supplies are UL Listed, CSA Certified.
Electrical Hazard: Shockless (less than 40 microamperes short circuited).
Do not use near flammable
materials or gases!
Materials of Construction:
Metal Parts: Brass, Zinc and Stainless Steel
Plastic Parts: UL rated 94 HB
Emitter: Stainless Steel
|
| Performance |
| Supply
Pressure |
Air Consumption
|
Sound
Level |
Dissipates
5kV* |
| PSIG |
BAR |
SCFM |
SLPM |
dBA |
SECONDS |
| 20 |
1.4 |
4.8 |
136 |
67 |
0.45 |
| 40 |
2.8 |
7.5 |
212 |
74 |
0.33 |
| 60 |
4.1 |
10.3 |
291 |
79 |
0.24 |
| 80 |
5.5 |
13.0 |
368 |
82 |
0.24 |
| 100 |
6.9 |
15.7 |
444 |
85 |
0.24 |
*
6" (15.3cm) from target |
|
|
|
