|
SunRod Miniature Cartridge Heaters
 |
Revolutionary Split
Sheath Design - SunRod split sheath cartridge heaters feature
a unique new construction that eliminates the failure points
of conventional cartridge heaters. A continuous resistor is
packed into the highest density insulation and and welded
to the lead connections. Lead wires can be bent sharply without
exposing the conductor, and exit through continuous insulation
rated to 900°Fahrenheit. |
| Standard Features |
Optional
Features |
- Lengths
from ½” - Apply heat to the smallest space!
- Hot Tip - Excellent for heating instruments, probes
- Long Life - Split sheath expansion provides maximum heat transfer
- Easy Removal - Contraction of split sheath ensures slide out removal
|
- Teflon Insulated
Leads, 24 gage stranded nickle leads – Rated to 450°F
- Mica-Fiberglas
Insulated Leads, 24 gage stranded nickle leads – Rated to 800°F
- Moisture Seal, RTV silicon rubber end seal – Rated to 450°F
|
|
| Specifications |
| Size |
Diameter |
Min
Length |
Max
Length* |
Max
Volts |
Max
Amps |
| 1/8" |
.122" +/- .002" |
1/2" +/-3%, with a 3/32“ minimum |
6" +/-3%, with a 3/32“ minimum |
120 |
4 |
| 4mm |
.155" +/- .002" |
5/8" +/-3%, with a 3/32“ minimum |
6" +/- 3% with 3/32 Inch Min |
120 |
4 |
| |
|
|
|
|
|
|
| Minimum
Wattages by length @ 120 volts* |
Size |
1/2" |
3/4" |
1” |
1
1/2" |
2" |
1/8" |
100 |
70 |
50 |
30 |
25 |
| Wattage Tolerances: |
For Heater lengths <= 3/4": +/- 20%
For Heater lengths > 3/4" : +10%/-15% |
Minimum Wattage at
12
Volts: multiply by .01 |
Minimum Wattage at
24
Volts: multiply by .04
|
Minimum Wattage at
48
Volts: multiply by .18 |
Minimum Wattage at
240
Volts: multiply by 4.0 |
|
| |
Standard Lead Wires
#24 gauge insulated with Teflon / Fiberglas, rated to 482°F, 12" long
Teflon Insulated Leads
Slender and flexible to simplify wiring, 24 gage stranded Nickel conductor, rated to 482°F
|
Lead Wire Options
Non-standard length - One Inch to 20 feet
Solid Nickel Leads - 1/4" to 12" lengths available, Bare or with continuous Teflon jacket
SIT leads - rated up to 500°F (260°C). Max. amperage capacity is 4A. Max. voltage is 240V |
|
Insertion - Miniature Cartridge
| Code
| Name | Price |
|
| |
SU12505024V15W | Cartridge Heater 1/8" by 1/2" long, 24V 15W (38.4 ohms) |
$198.00 |
|
SU12507524V30W | Cartridge Heater 1/8" by 3/4" long, 24V 30W (19.2 ohms) |
$186.00 |
|
SU12510024V40W | Cartridge Heater 1/8" by 1" long, 24V 40W (14.4 ohms) |
$170.00 |
|
SU125100120V40W | Cartridge Heater 1/8" by 1" long, 24V 40W (360 ohms) |
$170.00 |
|
SU12512524V60W | Cartridge Heater 1/8" by 1 1/4" long, 24V 60W (9.6 ohms) |
$178.00 |
|
SU125125120V60W | Cartridge Heater 1/8" by 1 1/4" long, 120V 60W (240 ohms) |
$178.00 |
|
SU12515024V60W | Cartridge Heater 1/8" by 1 1/2"long, 24V 60W (9.6 ohms) |
$186.00 |
|
SU125200120V50W | Cartridge Heater 1/8" by 2" long, 120V 50W (288 ohms) |
$198.00 |
|
SU125200120V100W | Cartridge Heater 1/8" by 2" long, 120V 100W (144 ohms) |
$198.00 |
|
SU125150120V30W | Cartridge Heater 1/8" by 1 1/2"long, 120V 30W (480 Ohms) |
$186.00 |
|