Super Ion Air Knife™ EXAIR's new Super Ion Air Knife removes static electricity from plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. The laminar sheet of air sweeps surfaces clean of static, particles, dust and dirt. Production speeds, product quality and surface cleanliness can improve dramatically.  The Super Ion Air Knife floods an area or surface with static eliminating ions - up to 20 feet (6.1m) away. A balanced airflow across its length will not cause misalignments to critical surfaces such as webs. Force can be adjusted from a "blast" to a "breeze". The Super Ion Air Knife is electrically powered, is shockless and has no moving parts. It also requires less than 5 SCFM of compressed air per foot of length at 5 PSIG (142 SLPM per 30cm of length at 0.3 BAR). Sound level is surprisingly quiet at 50 dBA for most applications.       Ionizing bars are very ineffective without an air delivery system. When used by itself, a bar must be mounted within an inch of the charged surface to fully neutralize it. This close mounting is impossible when the static is generated in confined areas of a machine. Ion coverage is minimal on oddly configured parts or when high production speeds are involved.   Static Eliminator Data Sheet Web cleaning Molding machinery Sheeters and trimmers Cleaning parts Pre-paint dust removal Shrink wrappers Package cleaning Bag opening / fill operations Printing equipment Air inlets provided on each end and bottom of the Super Ion Air Knife. Shims can be installed easily if additional hard-hitting velocity is required. Primary air does not impact any surface of the Air Knife keeping the sound level low. Insertion molded emitter points eliminate potential dirt accumulation that could degrade performance or eventually short the ionizing bar. Emitter points are sharp, durable stainless steel. The power cable is shielded and has integral grounding. The threaded bayonet connector is fully assembled and ready to use. Super Ion Air Knife Kits are available which include all components necessary for operation. Low air consumption Balanced airflow Quiet Operation Effective up to 20' (6.1m) Shockless, non-radioactive Compact, rugged, easy to install Lengths to 120" (3.05m) Low maintenance Variable force and flow Materials stay in position on an "L" sealer when static electricity is neutralized. The Model 7901 or 7907 Power Supply has a lighted power switch and (2) 5kV outlets Bumpers, car bodies and fascia are cleaned of dust and fibers prior to painting. The right type of air delivery is critical. Blowers produce an uneven, turbulent airstream that can cause the positive and negative ions to recombine before hitting the charged material. They are large, suffer mechanical wear and provide limited airflow control. The compact Super Ion Air Knife uses a small amount of compressed air to produce a balanced, laminar sheet of air to carry the ions to the charged surface, even when it is far away. Flow and force are easily controlled and there are no moving parts to wear out. Specifications: Standard lengths: 6" (15cm), 12" (30cm), 18" (46cm), 24" (61cm), 30" (76cm), 36" (91cm), 42" (107cm) Special lengths up to 42" (107cm) and systems up to 120" (3.05m) are available (please contact the factory). 5' (1.52m) shielded power cable with ground and assembled bayonet connector are included. EXAIR Model 7901 or 7907 Power Supply (5 kV) is required for bar operation. Power supplies are equipped with a 6' (1.83m) power cord, lighted power switch and (2) high voltage outlets. Compressed Air: 1/4" NPT inlets are provided on each end and the bottom. Electrical: For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7901 (115V) or 7907 (230V). Electrical Hazard: Ionizing bars are shockless (less than 40 microamperes short circuited). Do not use near flammable materials or gases! Materials of Construction: Super Air Knife: Aluminum Ionizing Bar Channel: Aluminum Plastic Parts: UL rated 94 HB Emitters: Stainless Steel Maximum Ambient Temperature: 165°F (74°C) Shims: Thicker shims can be installed easily if additional hard-hitting velocity is required.   Pressure Supply Air Consumption* Sound Level Dissipates 5kV** PSIG BAR SCFM SLPM dBA SECONDS 5 0.3 4 113 39 0.90 10 0.7 7 198 45 0.73 20 1.4 11 311 50 0.55 40 2.8 18 509 60 0.48 60 4.1 25 708 67 0.45 80 5.5 32 906 70 0.42 100 6.9 38 1075 73 0.36 * per foot (30.5cm) of length ** 12" (30.5cm) from target Ionizing bars are UL Component Recognized, CSA Certified. Power supplies are UL Listed, CSA Certified.

Code	Name	Price
EX111006	Exair 111006 6" (15cm) Super Ion Air Knife	$387.00
EX111012	Exair 111012 12" (30cm) SuperIon Air Knife	$493.00
EX111018	Exair 111018 18" (46cm) Super Ion Air Knife	$583.00
EX111024	Exair 111024 24" (61cm) Super Ion Air Knife	$666.00
EX111030	Exair 111030 30" (76cm) Super Ioni Air Knife	$784.00
EX111036	Exair 111036 36" (91cm) Super Ion Air Knife	$918.00
EX111042	Exair 111042 42" (107cm) Super Ion Air Knife	$1,059.00
EX111106	Exair 111106 6" (15cm) Super Ion Air Knife System	$666.00
EX111112	Exair 111112 12" (30cm) Super Ion Air Knife System	$772.00
EX111118	Exair 111118 18" (46cm) Super Ion Air Knife System	$862.00
EX111124	Exair 111124 24" (61cm) Super Ion Air Knife System	$955.00
EX111130	Exair 111130 30" (76cm) Super Ion Air Knife System	$1,073.00
EX111136	Exair 111136 36" (91cm) Super Ion Air Knife System	$1,207.00
EX111142	Exair 111142 42" (107cm) Super Ioni Air Knife System	$1,348.00
EX111206	Exair 111206 6" (15cm) Super Ion Air Knife Kit	$799.00
EX111212	Exair 111212 12" (30cm) Super Ion Air Knife Kit	$902.00
EX111218	Exair 111218 18" (46cm) Super Ion Air Knife Kit	$1,029.00
EX111224	Exair 111224 24" (61cm) Super Ion Air Knife Kit	$1,180.00
EX111230	Exair 111230 30" (76cm) Super Ion Air Knife Kit	$1,283.00
EX111236	Exair 111236 36" (91cm) Super Ion Air Knife Kit	$1,414.00