Ion Air Cannon
Ion Air Cannon™
flow of ionized air removes static and dust!
EXAIR's Ion Air Cannon neutralizes
static electricity and cleans at distances up to 15 feet (4.6m)
with no moving parts. It is ideal for those hard to reach spaces
or confined areas that require a concentrated flow of static eliminating
ions. With an optional pressure regulator, the air volume and velocity
are infinitely adjustable over a wide range, for light to heavy
The Ion Air Cannon will maximize ionized
airflow while minimizing compressed air consumption. A small amount
of compressed air is used to entrain a high volume flow of surrounding
air. This combined stream is ionized by an emitter point (shockless)
and delivered to the charged surface. A hose or tube can be connected
to the air intake of the Ion Air Cannon to draw quality air from
another area. It requires only 10 PSIG (0.7 BAR) for most applications. The compact design saves bench space
and allows mounting in confined areas. The sturdy stand is pre-drilled
and can be wall, bench or machine mounted. It incorporates a swivel
adjustment for directing the airflow.
Model 7901 or 7907 Power Supply has a lighted power switch and (2) 5kV outlets
opening - form and fill
and neutralize 3D parts
static on electronic assemblies
up to 15' (4.6m)
rugged, easy to install
can be ducted
moving parts - low maintenance
force and flow
The Ion Air Cannon incorporates
a Super Air
Amplifier* and ionizing collar, energized by a power supply.
A small amount of compressed air is injected into the barrel
of the cannon (1) inducing a high volume flow of surrounding
air to flow through it (2). An emitter point at the discharge
end of the cannon (3) ionizes the entire airstream. The result
is a high volume, conical flow of ionized air (4) capable of
eliminating static and cleaning at distances up to 15 feet (4.6m).
Because more than 90% of the ionized air is induced, the Ion
Air Cannon produces maximum airflow at minimum air consumption.
12" (30.5cm) from target
EXAIR Model 7901 or 7907 Power
Supply (5 kV) is required for operation. Power supplies are equipped with a 6' (1.83m) power cord, lighted
power switch and (2) high voltage outlets.Compressed Air: 3/8" NPT inlet provided
Electrical: For use with 5 kVrms, 5 milliamperes (max.) power supply, Model
7901 (115V) or 7907 (230V). Power Supplies are UL Listed, CSA Certified.
Electrical Hazard: Shockless (less than 40 microamperes short circuited).
Do not use near flammable
materials or gases!
Materials of Construction:
Air Cannon: Aluminum
Ionizing Collar: Aluminum
Plastic Parts: UL rated 94 HB
Emitter: Stainless Steel
Maximum Ambient Temperature: 165°F (74°C)
Shims: Thicker shims
can be installed easily if additional hard-hitting velocity is required.
EX7193||Exair 7193 Ion Air Gun Only||
EX7292||Exair 7292 Ion Air Cannon and Power Supply||
EX7492||Exair 7492 Ion Air Cannon Kit||
EX7901||Exair 7901 Power Supply Only (115V, 50/60Hz)||
EX7902||Exair 7902 Extension Cable, 5' (1.52m) length||
EX7905||Exair 7905 Digital Static Meter||
EX7907||Exair 7907 Power Supply Only (230V, 50/60Hz, 2 outlets)||