> Sensors - Safety Related Devices
-  Close This Window When Finished  -

MODEL Dimensions Description Switching Capacity Contact Configuration Mechanical Service Life (Operations) Connection Degree of Protection Actuators
UL NEMA IEC 144
A22E

Mounts in 22 or 25mm cutout,

30, 40, 60mm dia mushroom pushbutton

Push-Pull or Push-Lock, Turn-Reset operation, Safety lock mechanism prevents misuse, Finger protection is a standard feature, increased wiring efficiency with three row mounting for the switch unit, use either ring, spade terminals or ferrules, available in lighted, non- lighted, key-reset models 10A at 24-440VAC

10A at 24-380VDC

SPDT-NO
SPST-NC
DPST-NC
300,000 minimum screw terminals UL508 --- IP65
(enclosure)
---
A165E

Mounts in 16mm cutout,

30mm dia mushroom pushbutton

Includes safety lock to prevent malfunction, available in lighted (24VDC) & non- lighted models

Red Switch knob has "Reset" indication, "Stop" indication also available

5A at 125VAC
3A at 250VAC
3A at 30VDC
SPST-NC
DPST-NC
300,000 minimum solder terminals --- IP65
(enclosure)
---
D4B-N

99.5 H x 40 W x 43 D mm (3.92 x 1.57 x 1.69 in) Heavy-duty limit switch features direct drive contacts that insure contacts open when welded due to overload currents.
Snap-action switches retain high contact reliability during slow-moving operations.
Slow-action switches have positive opening contacts for wider electrical separation between contacts. Three-conduit switch body available. Meets IEC, UL, CSA and VDE 0660 approvals.
10 A continuous–120, 240, 480, 600 VAC, NEMA A600 SPDT, 1 normally open contact, 1 normally closed contact DPST, two normally closed contacts 30 million minimum 1/2 -14 NPT conduit entrance, terminal screws 3, 4, 4X, 6P and 13 3, 4, 4X, 6P and 13 IP67 Side rotary nylon roller lever
Adjustable side rotary rubber roller lever
Adjustable side rotary nylon roller lever
Adjustable side rotary rod lever
Plain top plunger
Top roller plunger
Coil spring wobble lever
Plastic rod wobble lever
D4BL

123.5 H x 112 W x 46.3 D mm (4.86 x 4.40 x 1.82 in) Safety-door lock switch uses special operation key to positively separate contacts, and features solenoid-locking mechanism to keep safety door closed until signal is received from another device that protected area is safe for workers to enter.
The mechanism is nearly impossible to defeat. UL, CSA approval.
10 A, 125 VAC inductive load, NEMA A300 *DPDT, double break, 1 normally closed/1 normally open; DPDB, 1 normally closed *DPDT, double break, 2 normally closed, +DPDB, 1 normally closed 1 million operations 1/2 NPT conduit entrance, terminal screws --- --- IP67 Horizontal-mount key
Vertical-mount key
Adjustable key
D4D-N

60 H x 31 W x 30 D mm (2.36 x 1.22 x 1.18 in) General purpose limit switch featuring a direct-opening contact mechanism which forcibly opens contacts even when welding has occurred. Low cost, plastic-body switch meets many European safety directives. Wide operating tempera-ture range. UL, CSA approval. 10 A, 125 VAC, inductive load DPDT, 2 normally closed DPDT, 1 normally open, 1 normally closed SPDT, 1 normally open, 1 normally closed 15 million operations PG 13.5, G 1/2, 1/2 -14 NPT conduit entrance, terminal screws Type 4 (indoor use) 3, 4, 6P, 13 IP65 Standard roller lever
Adjustable roller lever
Vertical roller lever
Horizontal roller lever
Plain top plunger
Roller plunger
Cat whisker wobble lever
Plastic rod wobble lever
MODEL Dimensions Description Switching Capacity Contact Configuration Mechanical Service Life (Operations) Connection Degree of Protection Actuators
UL NEMA IEC 144
D4D-R

94.1 H x 40.0 W x 41.5 D mm (3.70 x 1.57 x 1.63 in)

 

Plastic-body, pull-reset limit switch featuring direct-opening contacts. Low-cost switch meets many European safety directives. Wide operating temperature range. UL, CSA approved. 10 A max., 125 VAC DPDT, double break, 1 NO/1 NC; DPDT, double break, 2 NC 15 million minimum 1/2-14 NPT conduit entrance, terminal screws Type 4 (indoor use) 3, 4, 6P, and 13 IP65 Pull reset with roller
Adjustable roller
Adjustable rubber roller
Pull reset with plunger
Roller
One-way roller
Horizontal and vertical roller
D4DS

85 H x 31 W x 36 D mm (3.35 x 1.22 x 1.42 in) Safety-door limit switch that uses special operation key to positively separate contacts. Low-cost, plastic-body switch meets many European safety directives. Wide operating temperature range. UL, CSA approved. 10 A max., 125 VAC DPDT, double break, 1 NO/1 NC; DPDT, double break, 2 NC 15 million minimum 1/2-14 NPT conduit entrance, terminal screws Type 4 (indoor use) 3, 4, 6P, and 13 IP65 Horizontal mount key
Vertical mount key
Adjustable key

F3S-A

Full length of units range from 228.5mm (9.00) for 16 beam @ 10mm spacing to 1,028.5mm (48.49) for 48 beam @20mm spacing Self-contained design requires no control box, multiple units can be connected for a larger protected zone, heights from 140mm (5.51) to 940mm (37.0)

Meets OSHA, Canadian and worldwide standards for safeguarding personnel

Infrared LED
16, 32, 48 beams with 10mm spacing,

8, 16, 24, 32, 48 beams with 20mm spacing

10mm Beam Spacing:
16-150mm
32-310mm
48-470mm

20mm Beam Spacing:
8-140mm
16-300mm
24-460mm
32-620mm
48-940mm

10mm Beam Spacing:
Non-transparent
15mm (0.39) diameter

20mm Beam Spacing:
Non-transparent
25mm (0.98) diameter

Sensing Range:0.2m to 5.0m (7.87 to 16.40 ft)

24VDC

Two PNP transistor outputs, 300mA max. load

Connector on 400mm (15.75) cables; use extension cables
G7S

37 H x 62 W x 22.5 D mm (1.46 x 2.44 x 0.89 in) Plug-In Safety Relay with positive, force guided contacts suitable for safety circuits in press machinery, machine tools, and other production machinery Resistive: 3A at 240VAC & 24VDC

Inductive: 3A at 240VAC, 1A at 24VDC

4PST-NO + DPST-NC

3PST-NO + 3PST-NC

10 million minimum DIN rail mtg and screw terminals, solder terminals, PCB terminals UL508 --- IEC 255 ---
G9S

101 H x 111 D mm (3.98 x 4.37 in)

2 Pole : 22.5 W (0.88)
3 Pole: 68 W (2.68)
5 Pole / Off Delay: 91 W (3.58)

Ideal for safety door & emergency stop switch circuits, 2, 3, 5 Pole models incorporate LED indicators & replaceable fuses

Off-delay model also available

2 Pole, 24VDC model 66mA

3 Pole, 24VDC at 62.5mA to 240VAC at 12.5mA

5 Pole, 24VDC at 127mA to 240VAC at 22.9mA

2 Pole: DPST-NO, 24VDC coil voltage

3 Pole: 3PST-NO
5 Pole: 5PST-NO
24VDC, 120 VAC, 240VAC coil voltage

1 SPST-NC Aux

10 million minimum DIN rail mount

Screw mount for 2 Pole model

UL508 --- --- ---
MODEL Dimensions Description Switching Capacity Contact Configuration Mechanical Service Life (Operations) Connection Degree of Protection Actuators
UL NEMA IEC 144