 |
Vertical
Level Switch Configurations
Using 10-782 Float Switches |
|
| Style A:
Angle ConnectedSwitch
Switch
configuration is as shown with a bulkhead angle connector.
This allows the switch to be mounted through the side wall
of a tank up to 1/2" thick. The fitting seals with
an o-ring through a 13/32" clearance hole. The
switch may be close mounted or extended down with a nipple.
|
 |
| Part
Number: |
|
| SA-L1- |
_________________ |
-
|
_________________ |
| |
Nipple
Length
|
|
Material
|
|
|
| Select
to view Options |
|
| |
|
|
|
| Style B: Straight Bulkhead
Connector
Switch configuration is as shown with a 1/4" NPT fitting
and lock nut. Fitting will allow unit to be connected
to a female 1/4" pipe or it can be used to go through
a 17/32" clearance hole. The fitting seals with
an o-ring on through-hole applications.
|
|
| Part
Number: ES10-101 |
|
|
| SB-L1- |
________________ |
-
|
________________ |
| |
Nipple
Length
|
|
Material
|
|
| Select
to view Options |
|
| The following
four styles have a 1-1/4" NPT mounting fitting. This fitting
will allow the level switch assemblies to be inserted into a tank
through a standard 1-1/4" fitting or bung on a tank. This
fitting has a snap-off cover that is sealed with an o-ring and can
be used to make wire terminations, accept a cord grip, DIN style connector
or cable assembly.
Note:
When specifying level settings on multiple switch units, nipple
lengths should be no closer than 3" to each other for outside/in
installations. Also note that a top switch without a nipple
or connector will interfere with the threads on a 1-1/4" installation.
It is best to consider a 2" NPT adapter for these applications.
The approximate
minimum distance from the fitting to the first level is 3".
Nipple lengths are in 1" increments. When calculating nipple
lengths, add approximately 1-1/4" to determine the level at
which the switch will activate. (Subtract 1-1/4" from the desired
switching point to determine the nipple length and round to the
nearest 1" increment.)
|
|
| Style
1:
A single level
switch and nipple assembly mounted to a 1-1/4"
NPT fitting.
|
 |
| Part
Number: ES10-102 |
|
|
| S1-L1- |
________________ |
-
|
________________ |
| |
Nipple
Length
|
|
Material
|
|
| Select
to view Options |
|
| Style
2:
A dual level switch
and nipple assembly mounted to a 1-1/4" NPT fitting.
|
 |
| Part
Number: ES10-103 |
|
|
| S2-L1- |
____________ |
-L2-
|
____________ |
- |
_____________ |
| |
Nipple
Length
|
|
Nipple
Length
|
|
Material
|
|
| Select
to view Options |
|
Style 3:
A triple level switch and nipple assembly mounted to a 1-1/4"
NPT fitting.
|
 |
| Part
Number: |
|
|
|
S2-L1-
|
__________
|
-L2-
|
__________
|
-L3-
|
___________
|
-
|
__________
|
|
|
Nipple
Length
|
|
Nipple
Length
|
|
Nipple
Length
|
|
Material
|
|
| Select
to view Options |
|
| Style
4:
A four level switch
and nipple assembly mounted to a 1-1/4"
NPT fitting.
|
 |
| Part
Number: |
|
|
|
S4-L1-
|
___________
|
-L2-
|
___________
|
-L3-
|
___________
|
-L4-
|
___________
|
-
|
___________
|
|
|
Nipple
Length
|
|
Nipple
Length
|
|
Nipple
Length
|
|
Nipple
Length
|
|
Material
|
|
| Select
to view Options |
Home
