Circulation Heaters

Compact and efficient, circulation heaters may be used in forced or natural circulation systems to heat flowing gasses or liquids. Pipe plug or flanged immersion heater, vessel, insulation, terminal enclosure, mounting brackets and inlet and outlet connections are included. Installation is simple with only basic wiring and piping connections required. An integral thermostat is included on Series 1, 2, 3, and 5 items. An installation and maintenance manual is supplied with each Circulation Heater.

Be certain that the sheath material and watt density selected are compatible with the material being heated and operating temperature.

Applications:

	Heat transfer oils- Molding dies and platens, closed loop heat transfer systems for heat sensitive materials
	Fuel oil heating- Pre-heating for delivery to burners, pre-heating to pumping viscosity
	Water- Dishwashing and rinsing, hot water storage tanks, process water, jacketed kettles.
	Air, gasses, steam- Process air, boosting temperatures of gasses, steam superheating

	Special rating or size
	Moisture resistant/explosion resistant terminal enclosure
	Flexitallic gasket
	Mighty-Blade elements in some sizes
	Flanged ends on inlet and outlet on certain sizes
	Stainless steel heating chamber
	300 lb. or 600 lb. heating chamber and flanged construction
	Baffles in chamber to increase material velocity
	High temperature insulation (over 500 F application temperatures)
	Stand-off terminal enclosures to locate the termination from the flanged
	surface on higher temperature processes (over 500 F)
	Thermostat on Series 8 and larger units
	T2R Thermostat with manual reset over-temperature cut-out
	Thermocouple mounted near outlet for precise process control and/or welded to element sheath for high-limit protection
	Passivation of wetted parts
	Weatherproof outer jacket
	Solid State Controls/Control Panels
	ASME Certification

Ordering Information:
Specify: Catalog Number, Watts, Volts and Phase, Type of Termination, Thermostat range if included.

Where a catalog Circulation Heater cannot be defined, or, where any "Options" are required-Consult iProcesSmart.com

	View or download the Instruction Manual in PDF format
	Download the specification ordering data sheet

CIRCULATION HEATERS