MOISTURE AND CONTAMINATION RESISTANT LEADS
|
Fig. T-Teflon®
Seal Also see Fig. E Epoxy Seal information shown previously. Other materials are available to seal lead end for higher temperatures including epoxylite and hermetic seal. Consult Ogden. |
Swaged
in Teflon seal and leads resist oil and water up to 482
F/250 Mighty Watt Cartridge Heaters can be manufactured with flanged located at any point along sheath with adequate unheated area. Type W flanged can also be attached to Fig. U unheated section on stock items. |
FIG. X HIGH TEMPERATURE FULLY FLEXIBLE LEADS
 |
The
Fig. X modification is high temperature, fiberglass braided, mica
tape insulated lead wires internally connected and swaged in place.
Fully flexible from the exit of the sheath, the high temperature (850
F/450
C) lead wires are ideal for applications where spacing is limited
and flexing occurs. On the Fig. X Mighty Watt Plus, the modification
adds 1/4" to the sheath length of stock items. 12" leads
are standardspecify additional length.
|
|||||||||||||||||||||||||||||||||||||||||
 |
Screw terminals facilitate ease of connection using lug terminals, standard leads or bus bar. Fig. Y is available in 1/2", 5/8", 3/4", 15/16", 1" and 1-1/4" diameters. Standard terminals are 8-32 x 58". Other terminal sizes are available. Consult Ogden. |
For a closer look at terminations select link: Fig.A
Fig.1B Fig.1C
Fig.D Fig.E
Fig.F Fig.G
Fig.R Fig.N
Fig.M Fig.MC Fig.T
Fig.U
Fig.W Fig.X
Fig.Y
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
