Explosion-Proof
AC Motors - Three Phase, For Hazardous Locations|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FOR HAZARDOUS LOCATIONS
THREE PHASE
Underwriters Laboratories and Canadian Standards Association Listed
General Specifications:
These explosion
proof motors are designed and approved for application in hazardous environments
having certain explosive gases or materials present.
Features:
Rugged mechanical
construction meeting all requirements for safety. UL and CSA listed.
Double shielded, pre-lubricated ball bearings are standard. All motors
have inherent automatic overload protection. NEMA 1.0 Service Factor except
as noted.
Explosion-proof conduit box included at no extra cost.
Capacitors on single phase designs are mounted inside the motor frame.
Application Notes:
These
motors must be applied in accordance with the National Electric Code,
Article #500. A partial listing of explosive agents is noted below.
Consult NFPA Publication 497M for a complete listing. No LEESON motors
are listed for Class I, Group A or B. Please note subheads above each
column for qualifications of LEESON motors.
Class I
Group A: Acetylene
Group B: Butadiene, ethylene oxide, hydrogen, propylene oxide,
manufactured gases containing more than 30% hydrogen by volume.
Group C: Acetaldehyde, cyclopropane, diethyl ether, ethylene.
Group D: Acetone, acrylonitrile, ammonia, benzene, butane, ethanol,
ethylene dichloride, gasoline, hexane, isoprene, methane (natural gas),
methanol, naphtha, propane, propylene, styrene, toluene, vinyl acetate,
vinyl chloride, xylene.
Class II
Group E: Aluminum, magnesium an other metal dusts with similar
characteristics.
Group F: Carbon black, coke or coal dust.
Group G: Flour, starch or grain dust.
STEEL FRAME EXPLOSION-PROOF MOTORS ARE NOT CERTIFIED FOR INVERTER DUTY.
CLASS I, GROUPS C & D - CLASS II, GROUPS F & G • W/ CONDUIT BOX
|
1/3
to 3 HP
|
|
CLASS I, GROUPS C & D - CLASS II, GROUPS F & G • W/ CONDUIT BOX
|
1/3
to 5 HP
|
|
CLASS I, GROUPS C & D - CLASS II, GROUPS F & G • W/ CONDUIT BOX
|
1/3
to 3 HP
|
|
