Poultry
MotorsSingle & Three Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FEED-AUGER
DRIVE MOTORS
|
 |
|
HATCHERY
AND INCUBATOR FAN MOTORS
|
|
|
FEATHER
PICKER MOTORS
|
|
LEESON's Inverter
Rated Insulation system (IRIS™)
provides superior protection against voltage spikes induced by variable
frequency drives. This total insulation system protects better
than spike-resistant magnet wire alone. Specially formed phase insulation,
cushioned and sleeved connections (from the leads all the way into the
turns), and deep-penetrating, non-hygroscopic, high temperature varnish
are just a few features contributing to extra protection. All this plus
second generation spike-resistant magnet wire. The IRIS™ total
insulation system is standard at no extra cost in all LEESON stock
NEMA three-phase motors, 1 HP and larger.
|
|||||
Dust-tight, capacitor start motor with your choice of field proven electronic or protected mechanical starting switch - both eliminate damage caused when motor is over-speeded by obstructed auger.
Ball bearing, heavy duty industrial quality designs for high overload capacity. Side mounted conduit box. Flange mounts directly to drive assembly. Fully gasketed to keep out feed dust. Has screw driver slot in rear shaft. Continuous duty, with manual thermal overload protection. Motors of 3/4 HP and less in the two Standard Product Charts (click at right) have shaft of 1/2" diameter x 1 1/2" length, with flat; motors 1 HP and larger have 5/8" diameter x 1.97" length, with key.
 ` |
General Specifications:
Capacitor-type replacement motors for hatchery and incubator fan motors.
Catalog Number LEAC101341.00 is a permanent split capacitor motor for fan on shaft incubator fans. Band mounted, with 1" long extended through bolts for fan shroud. Shaft diameter 1/2" by 2 1/2", with full length flat. Connections in end of motor through 1/2"-14 NPT tap. UL Listed thermal overload.
NOTE: Cat.# LEAC101341.00 requires separately mounted 7.5 MFD, 370 VAC - not supplied unless requested. Capacitor Part number LEAC003014.09, list price $19.50.
Catalog Number LEAC114102.00 is a two-speed motor, dust-tight and totally enclosed for belt driven hatchery cooling fans. Resilient base. With UL Listed automatic thermal overload.
Mechanical Features:
Double shielded ball bearings permanently lubricated with Shell Dolium
R lubricant having a temperature range of -40°F to +320°F and
special formulation for extra long life and moisture resistance.
|
HP
|
RPM
60 Hz |
NEMA
Frame |
Catalog
Number |
Order
Now! |
Disc.
Sym. |
App.
Wgt. (lbs.) |
Voltage
|
Over-
load Prot. |
F.L.
Amps 230 V. |
"C"
Dim. (Inches) |
|
1/4
|
1625
|
48Y
|
 |
A
|
20
|
115/230
|
Auto.
|
1.6
|
10.31
|
|
|
1/2-0.22
|
1725/1140
|
56H
|
|
A
|
39
|
115
|
Auto.
|
**
9.3-5.6 |
11.81
|
Totally enclosed fan cooled construction, sealed bearings, condensate drains, USDA approved food-safe tough white epoxy finish.
|
HP
|
RPM
60 Hz |
NEMA
Frame |
Catalog
Number |
Order
Now! |
Disc.
Sym. |
App.
Wgt. (lbs.) |
Voltage
|
F.L.
Amps 230 V. |
%
F.L. Eff. |
"C"
Dim. (Inches) |
|
2
|
1740
|
145T
|
|
B
|
48
|
208-230/460
|
6.2
|
81.5
|
12.75
|
|
|
2•
|
1140
|
184TZ
|
|
B
|
72
|
230/460
|
7.2
|
86.5
|
15.47
|
|
|
2/1.5•
|
1140
|
112M§
|
|
B
|
72
|
230/460
|
7.2
|
86.5
|
15.47
|
•
These motors have a 1.3 continuous duty service factor, 3 HP continuous.
§ IEC frame.
Catalog numbers in green are EPACT motors.
Important Notice: By purchasing products from this Site, you acknowledge and agree that you have read and accept the Terms and Conditions of this online store. For more information email us at: info@iprocessmart.com |
|
|