Store Front Account Search Basket Contents Checkout
Sign In
Order History


Manufacturers
Environmental
Temperature
Level
   Level Controls Non-Contact
   Level Switches
     RF Level Switches
       LS2000 RF Level Switch
       LS2100 RF Level Switch
       LS6000 RF Level Switch
       LS7000 RF Level Switch
       LS7000/2 RF Dual Point Level Switch
       LS8000 RF Level Switch
       LS8000/2 Multi Point RF Level Switch
     Float Level Switches
   Liquid Level Gage
   Level Transmitters
Pressure
Flow
Sensors & Transmitters

 

 

 

 

sales@iprocessmart.com
Tel: 1-925-706-7433


Babbitt RF Level Switch

The LS7000 has features that make it the most versatile level control on the market today. It can measure virtually any liquid, dry material or interface. The proprietary radio frequency (RF) balanced impedence bridge has exceptional temperature stability, thus eliminating the need to recalibrate the unit from season to season. Every standard unit has an on-board fuse and surge suppressor to protect the circuitry from power surges. Additionally, a static suppression circuit protects against hostile bin environments created by static-prone materials such as plastic pellets. The built-in timer allows the user to select ON DELAY or OFF DELAY operation if desired. The timing range is adjustable from 1/8 second to 2 hours. The timer can be used to ignore wave action in a turbulent vessel, or the timer can be used to pump down a sump with a single probe.
The probe is made of solid 316 stainless steel rod and the insulator is made of Teflon. The seals are made with Viton "O" rings. All the electronics are housed in a cast aluminum explosion-proof enclosure.
Special materials of construction are available.

Babbitt LS7000

Calibration
All the necessary calibration indicators are on-board so all you need to calibrate the LS7000 is a small screwdriver. The on-board test switch allows manual testing of the outputs and your alarm/control devices.
When the probe is installed, it is calibrated in absence of material touching the probe. When the desired material comes in contact with the probe, the LS7000 is activated and gives the desired output.
If the probe you ordered is too long, simply cut it off to the desired length with a saw. If you need to add length, just weld on additional rods. Probes of all lengths are available from the factory.
Fail-safe electronics provide peace of mind. The modular electronics make trouble shooting and repair a snap. The entire unit is backed by our two year warranty.

SPECIFICATIONS:  
Power: 120VAC (+/- 15%) 50/60Hz, 2 watts, standard. 230VAC, 12VDC and 24VDC are optional.
Output: 2 Form C contacts, DPDT relay, 5Amp resistive at 125VAC, 230VAC; 30VDC.
On-Board Fuse 0.5 Amp
Fail Safe: Selectable high or low level.
Time Delay: Selectable ON DELAY or OFF DELAY.  Adjustable from 1/8 second to 2 hours.
RF Frequency: Approximately 1.3 MHz.
Vessel Entry: 1" NPT
Conduit Entry: 1" NPT
Hazardous Area: Class I, Group C, D. Class II, Group E,F,G.
Temperature: Probe: -30 deg F to +450 deg F
Electronics: -40 deg F to 385 deg F
Note - High temperature ratings are available, contact the factory with your application data.
Pressure: 1500 psi @ 75 deg F.
Note - High pressure ratings are available, contact the factory with your application data.
Construction: Probe: All wetted parts 316SS, Teflon and Viton.
Electronics: Housed in cast aluminum explosion-proof enclosure.
Operation and Maintenance Manual
Specifications are subject to change without notice.

LS7000 RF Level Switch



Babbitt LS 7000-VAC-S Level Switch with 316SS Probe Babbitt LS 7000-VAC-S Level Switch with 316SS Probe
Code: BALS7000-VAC-S
Price: $595.00
Quantity in Basket: none
 



Babbitt LS7000-VAC-H Level Switch with Halar Coated Probe Babbitt LS7000-VAC-H Level Switch with Halar Coated Probe
Code: BALS7000-VAC-H
Price: $580.00
Quantity in Basket: none
 






Ecommerce Shopping Cart Software by Miva