Store Front Account Search Basket Contents Checkout
Sign In
Order History


Manufacturers
Environmental
Temperature
Level
   Level Controls Non-Contact
   Level Switches
     RF Level Switches
       LS2000 RF Level Switch
       LS2100 RF Level Switch
       LS6000 RF Level Switch
       LS7000 RF Level Switch
       LS7000/2 RF Dual Point Level Switch
       LS8000 RF Level Switch
       LS8000/2 Multi Point RF Level Switch
     Float Level Switches
   Liquid Level Gage
   Level Transmitters
Pressure
Flow
Sensors & Transmitters

 

 

 

 

sales@iprocessmart.com
Tel: 1-925-706-7433


Babbitt RF Level Switch

The LS8000 remote-mounted radio frequency (RF) level switch is the perfect choice when it is unsafe or inconvenient to mount the electronics directly to the probe on the vessel.
A maintenance-free epoxy-encapsulated transmitter is mounted in the explosion-proof head of the probe. The receiver board can be mounted up to a mile from the transmitter. The transmitter is connected to the receiver with a twisted, shielded pair of wires (Belden 8761 or equal). The receiver board is wired to the supply voltage and has all the necessary calibration adjustments, and the relay output.
It is possible to calibrate the LS8000 without climbing a tall tank, or a probe can be located a long distance from a supply voltage.
The remote mounting does not sacrifice the reliability, stability or performance that makes Babbitt International level switches famous.
The ultra-high sensitivity adjustment on the LS8000 allows sensing of the dryest powders, fines and flakes. The LS8000 is perfect for materials such as dry herbicides, carbon fines and fly ash, as well as virtually any liquid.
Every standard unit has an on-board fuse and surge suppressor to protect the circuitry from power surges. Additionally, a static suppression circuit protects against hostile bin environments created by static-prone materials such as plastic pellets.
The built-in timer allows the user to select ON DELAY or OFF DELAY operation if desired. The timing range is adjustable from 1/8 second to 2 hours. The timer can be used to ignore wave action in a turbulent vessel, or the timer can be used to pump down a sump with a single probe.
The probe is made of solid 316 stainless steel rod and the insulator is made of Teflon. The seals are made with Viton "O" rings. The transmitter electronics are housed in a cast aluminum explosion-proof enclosure. The receiver board is provided with a snap-track mounting, or can be purchased with an optional enclosure.

Babbitt LS8000 Level Switch

Calibration:
All the necessary calibration indicators are on the receiver card so all you need to calibrate the LS8000 is a small screwdriver . When the probe is installed, it is calibrated in absence of material touching the probe. When the desired material comes in contact with the probe, the LS8000 is activated and gives the desired output. If the probe you ordered is too long, simply cut it off to the desired length with a saw. If you need to add length, just weld on additional rods. Probes of all lengths are available from the factory. Fail-safe electronics provide peace of mind. The modular electronics make trouble shooting and repair a snap. The entire unit is backed by our two year warranty.

SPECIFICATIONS:  
Power: 120VAC (+/- 15%) 50/60Hz, 2 watts, standard. 230VAC, 12VDC and 24VDC are optional.
Output: 2 Form C contacts, DPDT relay, 5Amp resistive at 125VAC, 230VAC; 30VDC.
On-Board Fuse 0.5 Amp
Fail-Safe: Selectable high or low level..
TimeDelay: Selectable ON DELAY or OFF DELAY. Adjustable from 1/8 second to 2 hours.
RF Frequency: Approximately 1.3 MHz.
Vessel Entry: 3/4" NPT
Conduit Entry: 3/4" NPT
Hazardous Area: Class I, Group C, D. Class II, Group E,F,G.
Temperature: Probe: -30 deg F to +450 deg F
Electronics: -40 deg F to 385 deg F
Note - High temperature ratings are available, contact the factory with your application data.
Pressure: 1500 psi @ 75 deg F.
Note - High pressure ratings are available, contact the factory with your application data.
Construction: Probe: All wetted parts 316SS, Teflon and Viton.
Electronics: Housed in cast aluminum explosion-proof enclosure.
Operation and Maintenance Manual
Specifications are subject to change without notice.

LS8000 RF Level Switch



Babbitt LS 8000-VAC-S Remote Mounted Level Switch with 316SS Probe Babbitt LS 8000-VAC-S Remote Mounted Level Switch with 316SS Probe
Code: BALS8000-VAC-S
Price: $595.00
Quantity in Basket: none
 



Babbitt LS 8000-VAC-H Remote Mounted Level Switch with Halar Coated Probe Babbitt LS 8000-VAC-H Remote Mounted Level Switch with Halar Coated Probe
Code: BALS8000-VAC-H
Price: $695.00
Quantity in Basket: none
 



  Babbitt LS 8000 Fuse ( 1/2 AMP )
Code: BALS8000-FUSE
Price: $8.00
Quantity in Basket: none
 



  Babbitt LS8000-R Receiver Card
Code: BALS8000-R
Price: $275.00
Quantity in Basket: none
 



  Babbitt LS8000-T Transmitter
Code: BALS8000-T
Price: $255.00
Quantity in Basket: none
 



  Babbitt LS 8000-HOUSING
Code: BALS8000-HOUSING
Price: $90.00
Quantity in Basket: none
 



  Babbitt LS8000-S-PROBE ASSEMBLY 10"
Code: BALS8000-S-PROBE-10
Price: $245.00
Quantity in Basket: none
 



  Babbitt LS 8000-H-PROBE ASSEMBLY 10"
Code: BALS8000-H-PROBE-10
Price: $355.00
Quantity in Basket: none
 






Ecommerce Shopping Cart Software by Miva