Printed circuit terminal blocks
The number of positions that can be supplied allow strips with as many positions as needed to be constructed in one or multiple level designs. As an alternative to the metric pitches of 3.5 mm, 5 mm and 7.5 mm, all types are also available in inch pitches. Additionally, there are multi- position printed circuit terminal blocks with an IC pitch of 2.54 mm for connection cross sections up to 0.5 mm².

Single printed circuit terminal blocks
Two solder pins anchor the single printed circuit terminal blocks reliably in the p.c.b. Slight loosening raises the metric pitch to inch pitch. To increase the insulation spacings, 2.5 mm thick interlocked pitch spacers can be inserted. The terminal blocks are supplied preassembled in blocks of ten.

MINI-COMBICON plugs and headers
The MINI-COMBICON series reference data: 2 to 20-position versions, with and without flange, with the extremely space-saving 3.5 mm or 3.81 mm pitch, low constructional height and generous connection space of 1.5 mm2, 8 A nominal current with 125 V. Coding elements are moulded onto the connection plugs and are simply cut off. The coding section is inserted into the corresponding groove on the base.

COMBICON plugs and headers
Standard COMBICON is available in 2 to 24-position versions, with and without screw flange, with 5 or 5.08 pitch. Their particular feature is the generous connection space of 2.5 mm2 and 12 A nominal current with 250 V. The horizontal, vertical, angled and front wiring with the various plugs in screw or spring technology solves every connection problem.

POWER-COMBICON plugs and headers
COMBICON with 7.62 mm pitch for high power levels: 20 A nominal current with 400 V, with 4 mm2 connection space, in 2 to 12-position versions, with and without mounting ear. A plug-in coding section ensures coding without loss of positions. Various plugs are available in screw and crimp technology for horizontal and vertical plug-in directions.

Feed through housings
In the field of electronic device manufacture, the call for housing feed throughs is growing. The various DFK versions of the MINI-COMBICON, standard COMBICON and POWER-COMBICON series do justice to this demand. 2 to 16, or 2 to 12-position versions are available with the common pitches, with or without screw flange, with a current carrying capacity of 8 to 20 A and 125 to 400 V nominal voltage.

COMBICON plug-in blocks for direct mounting
COMBICON plug-in blocks allow e.g. printed circuits or a "flying" conductor connection to be replaced with a minimum of service. The external connections are made with a sturdy screw connection using the tension sleeve principle. With the help of the lateral mounting ears, the plug-in blocks are screwed onto mounting plates or device walls.

Rail-mountable COMBICON plug-in blocks
These COMBICON plug-in blocks can be snapped onto 15 mm, 32 mm and 35 mm wide mounting rails. Various versions with a 3.81 mm, 5.08 mm and 7.62 mm pitch are available as MINI-COMBICON, standard COMBICON and POWER-COMBICON series, with and without screw flange and with up to 16 or 12 positions.

Electronic housings
Professional "packaging" for industrial electronics is provided with our comprehensive range of housings. In addition to a large standard assortment, different shapes and sizes are also available. Housings can be planned for as early as in the design stage - their electronics with the appropriate housing thus becomes a perfect product designed for the market.