Universal terminal blocks, UK
Universal terminal blocks for many areas of application, with cross sections of 0.2 to 240 mm² can be wired fast and reliably, can be bridged and can be labelled on both sides. With the universal housing base for snapping onto C and G mounting rails (NS 32 and NS 35). An extensive range of accessories ensures practical applications.

High current terminal blocks
High current terminal blocks from PHOENIX CONTACT have an enclosed housing. The terminal block series covers cross sections of 10 to 240 mm² and also includes ground terminal blocks, pick-off terminal blocks, common feed blocks and high current connectors. Variants with screw and cable lug connection are available.

Double level terminal blocks
Double level terminal blocks are available for cross sections of 0.15 to 10 mm². These terminal blocks save up to 50% space in the switch cabinet, since two potentials are guided in two separate levels. Because they are bridgeable in one or both levels, all practical circuits can be realized using them.

Installation terminal blocks
Three-level installation terminal blocks save space and ensure a clear overview in the distribution cabinets. All conductor connections for a single-phase electric circuit are mounted one above the other in one housing: the associated circuits are clearly recognizable. An isolation test is possible without disconnecting the N conductor.

Fuse terminal blocks
For every application, there is the right fuse terminal block: from the disconnect lever and screw cap fuse terminal blocks, down to the plug-in and flat-type fuse terminal blocks, the thermo-magnetic circuit breakers and NEOZED or DIAZED fuse terminal blocks. Optional LEDs signalize that the fuse has been triggered.

Knife disconnect terminal blocks
Knife disconnect terminal blocks allow interferences to be found quickly and maintenance work in measurement and control systems to be carried out off load. The terminal blocks have a load carrying capacity of up to 16 A, the disconnect knives are easy to operate. Their extremely narrow construction (only 5 mm wide) saves a great deal of space - especially in the double level version.

Switchable terminal blocks
This range of terminal blocks is designed to suit the nu-merous circuit requirements in the field of electricity generation and supply. It includes normal mode feed-through terminal blocks and slide-type terminal blocks, common mode test disconnect terminal blocks and universal, i.e. normal and common mode test disconnect terminal blocks - including a comprehensive range of testing and switching accessories.

Shield terminal blocks
With the SK series, PHOENIX CONTACT has a complete range of shield terminal blocks for the shielded connection of cables. Using this series, a low impedance connection of the cable shield to the reference potential can be creat- ed. The shield terminal blocks are available in three differ- ent sizes for shielded cables with a cross section of 8, 14 and 20 mm.

Marking and Mounting
For professional labelling of the individual components in the switch cabinet, we offer a comprehensive range of marking and labelling systems. For example, terminal block, conductor and cable marking systems, device marking systems and the CMS computer marking system, comprising software, plotter, engraving and milling system.

Tools
Our professional tools range from cable cutter to various crimping tools, right down to screwdrivers, safety tools and profile cutters. An outstanding feature of this range is its fatigue-free handling and high-quality workmanship.