|
Style 007 Performance and Stlye 009 Special Application Heaters
 |
Style 007 Performance and Style 009 Special Application Heaters |
Style 007 Performance Heaters |
The Style 007 Fluid Heater uses the same element configuration as the Style 001 and 003, but in a stainless steel pipe. This construction is suited to in-line applications where pipe threads are required at both inlet and outlet ports. Electrical terminations are offered in the form of lead wires and as feedthrus rated up to 150 psi. These heaters can be used to heat fluids other than air as long as the fluid is non-conductive and does not chemically react with 300 series stainless steel, silver solder, nickel, aluminum oxide or the epoxy potting material used on the leaded model. This product must be properly grounded and fused. |
|
Style 009 Special Application Heaters |
CO009-11178 |
Special Application Heater |
 |
Heater inflation nozzle for twin sheet vacuum forming of plastics
This heater was designed to deliver heated air between two plastic sheets so that twin sheet forming can be accomplished in a standard shuttle vacuum former. The input air port is connected to a filtered regulated air source. The electrical connections are made through temperature controller #006-10062 to a 120 volt source. The heated air is delivered between the sheets by means of a rectangular stainless steel tube 1/8" x 11/16" x 5-1/2" long. The air flow rate is normally set between 50 - 100 cubic feet per hour and the temperature is set between 260-330 F, depending on the material being formed. The performance curves for this heater show that the required voltage for these conditions is in the 30-40 volt range. This low operating voltage and the fast response of the heater (low thermal mass) dictate the need for the controller/power module package which has a voltage limiting feature. |
|
CO009-10252 Convectronics Blower 3/4HP, 115/230V Single Phase, Max. Flow - 34 SCFM |
CO009 10253 Convectronics Pressure Gauge 0 - 2PSI |
CO009-10254 Convectronics Filter |
|
|
Style 007 Fluid Heaters
|