For a closer look at terminations select link: Fig.A Fig.1B Fig.1C Fig.D Fig.E Fig.F Fig.G Fig.R Fig.N Fig.M Fig.MC Fig.T Fig.U Fig.W Fig.X Fig.Y
|
|
The following is a representative list of Cartridge Immersion Heaters available. Part numbers shown are for Figure N, Figure M and Figure MC. Specify with cable and length required for Figure MC.
Watt density must be suitable for the liquid being heated. See applications data for correct sheath material and watt density limitations. Fittings are available in brass, steel and stainless steel materials. Brass and steel pipe fittings are silver-soldered and stainless steel heliarc welded. Also available with 312" Octagon terminal box. When ordering, specify:
 |
Diameter and material of heater | |
Lead length and type |
|
Size, material and type of pipe fitting | |
Wattage and voltage |
|
Immersion depth ("B" dimension) |
| Heater Dia. | Pipe Size N.P.T. | Dimensions | ||
| A* | C** | D | ||
| 1/4" | 1/8-27 | 7/16 | 5/8 | |
| 3/8" | 1/4-18 | 5/8 | 5/8 | 1-7/16 |
| 1/2" | 3/8-18 | 11/16 | 3/4 | 1-7/16 |
| 5/8" | 1/2-14 | 13/16 | 13/16 | 1-15/16 |
| 3/4" | 3/4-14 | 1-1/16 | 15/16 | 2 |
| 15/16" | 1-11-1/2 | 1-3/8 | 1-3/16 | 2-1/4 |
| 1" | 1-11-1/2 | 1-3/8 | 1-3/16 | 2-1/4 |
| 1-1/4" | 1-1/4-11-1/2 | 1-3/4 | 1-3/16 | 2-1/2 |
| Dimensions | Wattage | Voltage | Watt Density | Catalog Number | ||
| Dia. | B | Pipe Size | ||||
| 5/8" | 1-3/4" | 1/2" | 100 | 120 | 30 | MWEL01N0136 |
| 5/8" 5/8" 5/8" 5/8" |
3-3/4" 3-3/4" 3-3/4" 3-3/4" |
1/2" 1/2" 1/2" 1/2" |
150 150 250 250 |
120 240 120 240 |
20 20 35 35 |
MWEL03N0137 MWEL03N0138 MWEL03N0139 MWEL03N0140 |
| 5/8" 5/8" 5/8" 5/8" |
8" 8" 8" 8" |
1/2" 1/2" 1/2" 1/2" |
300 300 500 500 |
120 240 120 240 |
25 25 40 40 |
MWEL03A0141 MWEL03A0142 MWEL03A0143 MWEL03A0144 |
| 5/8" 5/8" 5/8" 5/8" |
12" 12" 12" 12" |
1/2" 1/2" 1/2" 1/2" |
500 500 750 750 |
120 240 120 240 |
25 25 40 40 |
MWEL12A0145 MWEL12A0146 MWEL12A0147 MWEL12A0148 |
| 3/4" 3/4" 3/4" 3/4" |
5" 5" 5" 5" |
3/4" 3/4" 3/4" 3/4" |
200 200 300 300 |
120 240 120 240 |
17 17 25 25 |
MWEN05A0092 MWEN05A0093 MWEN05A0094 MWEN05A0095 |
| 3/4" 3/4" 3/4" 3/4" |
6-1/2" 6-1/2" 6-1/2" 6-1/2" |
3/4" 3/4" 3/4" 3/4" |
300 300 500 500 |
120 240 120 240 |
18 18 30 30 |
MWEN06J0096 MWEN06J0097 MWEN06J0098 MWEN06J0099 |
| 3/4" 3/4" 3/4" 3/4" |
10-3/4" 10-3/4" 10-3/4" 10-3/4" |
3/4" 3/4" 3/4" 3/4" |
500 500 750 750 |
120 240 120 240 |
20 20 30 30 |
MWEN10N0100 MWEN10N0101 MWEN10N0102 MWEN10N0103 |
| 3/4" 3/4" 3/4" 3/4" |
13-3/4" 13-3/4" 13-3/4" 13-3/4" |
3/4" 3/4" 3/4" 3/4" |
600 600 1000 1000 |
120 240 120 240 |
18 18 30 30 |
MWEN13N0104 MWEN13N0105 MWEN13N0106 MWEN13N0107 |
For a closer look at terminations select link: Fig.A Fig.1B Fig.1C Fig.D Fig.E Fig.F Fig.G Fig.R Fig.N Fig.M Fig.MC Fig.T Fig.U Fig.W Fig.X Fig.Y
|
|
Home
|
Important Notice: By purchasing products from this Site, you acknowledge and agree that you have read and accept the Terms and Conditions of this online store. For more information email us at: info@iprocessmart.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
