| Thermostats |
|
 |
Used
wherever automatic control is required for liquids, platens,
air or process heating applications. These general purpose thermostats
are actuated by expansion and contraction of a liquid in the
bulb and diaphragm assembly. Standard capillary length is 48".
Snap Action Double Pole - Single Throw, Direct Acting, Contacts
normally closed. Also available: Protective Wells, refer to
sensor section. Packing Gland Assemblies, PC4482-1 |
Catalog
Number |
Temperature
Range °F |
Ratings
in Amperes |
Bulb
Style |
| 120-277VAC |
480VAC(2-pole) |
| D1-L1 |
60-250 |
30 |
21 |
3/16"
x 15-3/8" |
| D1-H1 |
200-550 |
30 |
21 |
3/16"
x 11-5/8" |
| D1-L2 |
60-250 |
30 |
21 |
1/4"
x 9-1/2" |
| D1-L3 |
60-250 |
30 |
21 |
3/8"
x 4-1/2" |
| D1-H3 |
200-550 |
30 |
21 |
3/8"
x 3-3/4" |
|
| Simmerstat®
Regulator or Cycling Timer TYPE TYJ |
 |
"Simmerstat"
regulators provide a range of control from zero to full heat
by opening and closing a snap-action switch in the circuit at
short, definite time intervals, convenient for cookers and hot
plates, grills, glue pots, drying ovens and similar applications.
The control knob has a scale marking in five divisions from
"off" to "full". Ratings: 15 amps-200/250VAC or 15 amps-100/125VAC.
|
|
| Surface
Mount Thermostats |
|
 |
Surface mount thermostats
are suitable for appliance or small wattage applications.
Applied firmly to the surface of the heated object, the thermostat
is activated by expansion and contraction of the base plate
causing vertical movement of the thermal spring to open and
close the contacts. SPST, Contact open on temperature rise.
Rating: 120/240V, 1600 watt maximum. Inherent sensitivity:
Approximate 2°F.
Dimensions:
Case 1/2" high, 11/16" wide, 2-7/8" overall length. Mounting
holes on 2-17/32" centers. (Set screw type 23/32" overall
height).
|
Catalog
Number |
Type |
Range
Min. Max. |
Shaft
Length |
Total
Rotation |
| B200A1 |
Variable |
OFF 525°F |
1" |
310° |
| B200A1-1 |
Variable |
OFF 525°F |
1-1/2" |
310° |
| B200F |
Set
at Room
Temperature |
OFF 600°F |
Set
Screw |
360°F
Per Turn
of Adj. Screw |
|
 Chart
Recorders
Where
process monitoring and a permanent record of the process variables
are required, OGDEN Chart Recorders feature a digital display
and trend display. The CR-10 and CR-18 Chart Recorders are programmable
with a wide selection of functions including alarms.
|
Home